How to Assemble Your Merach R14 Water Rowing Machine

Saygin Celen
3 days ago
2 min read

In about 10 minutes—and with just the included Allen wrench and hardware—you’ll have your new water rowing machine ready to deliver full-body rowing machine workouts at home.

The R14 arrives 90 % pre-assembled, packaged with clear part labeling and an Allen wrench, purification tablets, and a motorized pump for fast setup.

Quick Assembly Steps

Unpack & Inspect Components
Attach Left & Right Rear Rails
Install Seat Assembly
Mount Monitor Frame
Secure Handles & Footrests
Fill & Purify Water Tank
Final Checks & Test Row

8-Minute Merach R14 Water Rowing Machine Assembly

If You are Still Looking into Getting Your Merach R14

Experience the Merach R14—the best value home rowing machine: fast, free 2–4 day US shipping, and a 30-day money-back guarantee. Use Row10Sale

Discover & Shop Merach R14 →

Detailed Merach R14 Water Rowing Machine Assembly Instructions

1. Unpack & Inspect Components

Clear at least 6 ft × 6 ft of space on a soft surface. Lay out the main frame (A), rear rails (B/C), seat (D), monitor assembly (E), hardware bags, and pump kit. Verify you have screws, an Allen wrench, and a Phillips wrench.

2. Attach Left & Right Rear Rails

Remove the two pre-installed screws (100) on each side of the main frame (A). Align rail assemblies (B/C) with mounting holes and insert screws (100) through rails into the frame. Use the Allen wrench (101) and Phillips wrench (103) to hand-tighten, then fully secure until snug—rails should slide but not wobble.

3. Install Seat Assembly

Unscrew seat stops (57) and socket-cap screws (77) from the rail ends. Slide seat assembly (D) onto the rails until it reaches the rail connection plate (05). Re-insert seat stops (57) and screws (77), tightening with the Allen wrench (101). Test the seat’s glide—adjust if it catches.

4. Mount Monitor Frame

Detach the four screws (72) from the main stand (A). Connect the monitor wiring (E1) to the main-frame connector (A1). Position monitor assembly (E) on the frame, align screw holes, then secure with screws (72) using the Allen wrench (102). Ensure the wiring is tucked out of the way.

5. Secure Handles & Footrests

Slide the handlebar assembly into the front rail and tighten the clamp by hand for a firm grip. Attach footrests at your preferred angle, fastening with Phillips screws. Straps should hold feet snugly but not restrict movement.

6. Fill & Purify Water Tank

Remove the rubber fill plug on top of the transparent tank. Place the electric pump in a bucket of distilled water and insert hoses into the tank. Run the pump until water reaches the “Medium” fill line, then drop in one purification tablet. Wait 5 minutes before rowing.

7. Final Checks & Test Row

Walk around the machine to ensure no tools or packaging are left in the mechanism. Tighten any loose screws. Power on the display and perform a slow stroke—confirm smooth water resistance rowing machine drag and accurate readings. Sync to your rowing machine app to record metrics.

And this is how Merach R14 water rowing machine assembly is made.